ASTM/ASME Standard Alloy Pipes
Specification:
ASTM A213M-09 Standard Specication for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes.
This standard is issued under the fixed designation A 213/A 213M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (′) indicates an editorial change since the last revision or reapproval.
Size (mm) we can supply:
Hot-rolled: O.D.: 51-508; W.T.:7∼60; L: max 16000
Cold-drawn: O.D.: 10-50; W.T.:2∼10; L: max 16000
Hot-expanded:O.D.: 325-1020; W.T.:6∼50; L: max 12000 and other specifications in accordance with customer requirements.
Packing:
Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test.
Surface Treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested.
Mechanical properties:
Steel Grade |
Tensile StrengthN/mm2(min) |
Yield StrengthN/mm2(min) |
Elongation % (min) |
TP304 |
515 |
205 |
35 |
TP304L |
485 |
170 |
35 |
TP316 |
515 |
205 |
35 |
TP316L |
485 |
170 |
35 |
TP321 |
515 |
205 |
35 |
T11 |
≥415 |
≥205 |
30 |
T12 |
≥415 |
≥220 |
--- |
T13 |
≥415 |
≥205 |
30 |
Chemical Composition(%, max)
Steel Grade |
C |
Si |
Mn |
Cr |
Ni |
Mo |
S |
P |
TP304 |
0,08 |
0,75 |
2 |
18 - 20 |
8 - 11 |
- |
0,03 |
0,04 |
TP304L |
0,035 |
0,75 |
2 |
18 - 20 |
8 - 13 |
- |
0,03 |
0,04 |
TP316 |
0,08 |
0,75 |
2 |
16 - 18 |
11 - 14 |
2 - 3 |
0,03 |
0,04 |
TP316L |
0,035 |
0,75 |
2 |
16 - 18 |
10 - 15 |
2 - 3 |
0,03 |
0,04 |
TP321 |
0,08 |
0,75 |
2 |
17 - 20 |
9 - 13 |
- |
0,03 |
0,04 |
T11 |
0.05-0.15 |
0.50-1.00 |
0.30-0.60 |
0.5-1.0 |
--- |
1.0-1.5 |
≤0.25 |
≤0.025 |
T12 |
0.05-0.15 |
≤0.50 |
0.30-0.61 |
0.80-1.25 |
--- |
0.44-0.65 |
≤0.25 |
≤0.025 |
T13 |
0.05-0.15 |
≤0.50 |
0.30-0.60 |
1.90-2.60 |
--- |
0.87-1.13 |
≤0.25 |
≤0.025 |
Ordering Information
Orders for material under this specification should include the following, as required, to describe the desired material adequately:
Quantity |
Feet, meters, or number of lengths |
Name of material |
Seamless Alloy Steel Pipe |
Grade |
STANDARD AND STEEL GRADE |
Manufacture |
Hot-finished or cold-drawn |
Size using one of the following: |
|
NPS and Schedule Number |
|
Outside Diameter and Nominal Wall Thickness |
|
Length |
Specific or Random |
End Finish |