The equipment is hydraulic bending steel mesh production line is applicable to the rapid development to today`s construction industry needs design, the small size and easy to move, flexible variety of sizes, according to the demand curve at any angle between the 800-1800.
CHARACTERISTIC:
1. Independent hydraulic driving device.
2. Imported electricity components.
3. Mesh bending control system easy for operate.
4. Control panel easy for operate.
5. Imported hydraulic system.
6. Control systems: SIEMENS, MITSUBISHI, PANASONIC.
Operating Video Link(off-coil):
http://www.youtube.com/watch?v=ZFwuk4mg3sE
Products and Services:
Stirrup bender, rebar shearing line, rebar bending center, wire mesh welding machine, wire straightening and cutting machine, wire cold rolling machine, lattice girder welding machine, butt welder, wire mesh welding machine, Reinforcing mesh, mesh welding machine, welded mesh machine, mesh machinery, steel reinforcing machine, machine mesh, wire mesh welded machine, welding machine, welding line, welding mesh machine and wire mesh machinery etc.
TECHNICAL DATA:
Model | GWC-2050 | GWC-2200 | GWC-2400 | GWC2600 |
Installed power(kva) | 6*40 | 6*40 | 6*40 | 6*40 |
System coltagte(v) | 380V 50Hz | 380V 50Hz | 380V 50Hz | 380V 50Hz |
Control voltage(v) | DC 24V | DC 24V | DC 24V | DC 24V |
Power cable cross-sectional area | 3*150mm ² | +1*50mm ² | 3*150mm ² | 3*185mm ² +1*95mm ² |
Max.mesh width | 2200 | 2300 | 2600 | 2600 |
Line wire spacing | 50-200 CNC | 50-200CNC | 50-200 CNC | 50-200CNC |
Cross wire spacing | ≥25mm steplessly adjustable | |||
Wire diameter(mm) | 3-6 | 3-6 | 3-6 | 3-6 |
Max. welding capacity | 6+6 | 6+6 | 6+6 | 6+6 |
Max. welding speed(time/min) | 60-100 | 60-100 | 60-100 | 60-100 |
Max. welding spot nos.(group) | 20 | 24 | 24 | 26 |
Pressed air(MPa) | ≥0.6 | ≥0.6 | ≥0.6 | ≥0.6 |
Wire feeding method | Pre-cut/off-coil | |||
Cater conrner accuracy(mm) | ≤2 | ≤2 | ≤2 | ≤2 |
Raw material | Cold drawn wire, stainless wire, galvanized wire |