ASTM/ASME Standard Alloy Pipes
Specification:
ASTM A519- specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The tubing shall be coated with a film of oil before shaping to retard rust when specified.
Size (mm) we can supply:
Hot-rolled: O.D.: 51-508; W.T.:7∼60; L: max 16000
Cold-drawn: O.D.: 10-50; W.T.:2∼10; L: max 16000
Hot-expanded：O.D.: 325-1020; W.T.:6∼50; L: max 12000 and other specifications in accordance with customer requirements.
Packing:
Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test.
Surface Treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested.
Grade and Chemical Composition (%)
|
Grade |
C |
Mn |
P≤ |
S≤ |
Si |
Cr |
Mo |
|
1008 |
≤0.10 |
0.30-0.50 |
0.040 |
0.050 |
- |
- |
- |
|
1010 |
0.08-0.13 |
0.30-0.60 |
0.040 |
0.050 |
- |
- |
- |
|
1018 |
0.15-0.20 |
0.60-0.90 |
0.040 |
0.050 |
- |
- |
- |
|
1020 |
0.18-0.23 |
0.30-0.60 |
0.040 |
0.050 |
- |
- |
- |
|
1025 |
0.22-0.28 |
0.30-0.60 |
0.040 |
0.050 |
- |
- |
- |
|
1026 |
0.22-0.28 |
0.60-0.90 |
0.040 |
0.050 |
- |
- |
- |
|
4130 |
0.28-0.33 |
0.40-0.60 |
0.040 |
0.050 |
0.15-0.35 |
0.80-1.10 |
0.15-0.25 |
|
4140 |
0.38-0.43 |
0.75-1.00 |
0.040 |
0.050 |
0.15-0.35 |
0.80-1.10 |
0.15-0.25 |
Mechanical Properties:
|
Grade |
Condition |
MPa Tenslle Point |
Yield Point |
Elongation |
|
1020 |
CW |
≥414 |
≥483 |
≥5% |
|
|
SR |
≥345 |
≥448 |
≥10% |
|
|
A |
≥193 |
≥331 |
≥30% |
|
|
N |
≥234 |
≥379 |
≥22% |
|
1025 |
CW |
≥448 |
≥517 |
≥5% |
|
|
SR |
≥379 |
≥483 |
≥8% |
|
|
A |
≥207 |
≥365 |
≥25% |
|
|
N |
≥248 |
≥379 |
≥22% |
|
4130 |
SR |
≥586 |
≥724 |
≥10% |
|
|
A |
≥379 |
≥517 |
≥30% |
|
|
N |
≥414 |
≥621 |
≥20% |
|
4140 |
SR |
≥689 |
≥855 |
≥10% |
|
|
A |
≥414 |
≥552 |
≥25% |
|
|
N |
≥621 |
≥855 |
≥20% |
Please note the meaning of below abbreviation in above table:
- HR----Hot Rolled
- CW----Cold Worked
- SR----Stress Relieved
- A----Annealed
- N----Normalized
Ordering Information
Orders for material under this specification should include the following, as required, to describe the desired material adequately:
|
Quantity |
Feet, meters, or number of lengths |
|
Name of material |
Seamless Alloy Steel Pipe |
|
Grade |
STANDARD AND STEEL GRADE |
|
Manufacture |
Hot-finished or cold-drawn |
|
Size using one of the following: |
|
|
NPS and Schedule Number |
|
|
Outside Diameter and Nominal Wall Thickness |
|
|
Length |
Specific or Random |
|
End Finish |